Cable Trays & Accessories

Cable Trays Ladder, are designed to meet most requirements of cable and electrical wire installations and comply to local and international standards of fabrication and finishing.

Standards:

– IEC 61537:2007
– BS EN 61537:2007
– NEMA VE 1 – 200
– NEMA VE 2 – 2006
– NEC (ANSI / NFPA 70)

Rung Types (Swaged and Channel)


Swaged Type (Aluminum & Steel)

Rounded tubular with 25 mm diameter
Rung standard spacing 229 mm

Channel Type (Steel)

Plain or slotted, and can be mounted upwards or downwards.
Rung standard spacing 229 mm.

Materials

Pre-Galvanized, Hot-Dip Galvanized, Stainless Steel and Aluminium.

Material Thickness

1.0 mm | 1.20 mm | 1.50 mm | 2.00 mm


LADDER TYPE RUNS ALUMINUM SECTION


LIGHT DUTY LCT 1.00 mm thickness

Side Height: 50 mm
Widths: 50, 100, 150, 200, 225, 300, 400, 450 mm

MEDIUM DUTY MCT 1.20 mm thickness

Side Height: 50mm
Widths: 50, 100, 150, 200, 225, 300, 400, 450 mm

Side Height: 75 mm
Widths: 100, 150, 200, 225, 300, 400, 450 mm

Side Height: 100 mm
Widths: 100, 150, 200, 225, 300, 400, 450 mm

HEAVY DUTY HCT 1.50 mm thickness

Side Height: 50mm
Widths: 50, 100, 150, 200, 225, 300, 400, 450, 500, 600, 700 mm

Side Height: 75mm
Widths: 100, 150, 200, 225, 300, 400, 450, 500, 600, 700 mm

Side Height: 100mm
Widths: 100, 150, 200, 225, 300, 400, 450, 500, 600, 700 mm

LIGHT DUTY LCT 1.00 mm thickness

Side Height: 50 mm
Widths: 50, 100, 150, 200, 225, 300, 400, 450 mm

FITTINGS


BEND 45°

BEND 90°

INTERSECTION

OUTSIDE RISER BEND 45°

INSIDE RISER BEND 45°

OUTSIDE RISER BEND 90°

INSIDE RISER BEND 90°

REDUCER

TEE BRANCH

© 2017 SFSP Lebanon | All rights reserved